Bu ürünün kampanyalı satışı stoklarla sınırlıdır. Bir tüketici bu kampanya stoğundan maksimum 10 adet satın alabilir.
Çiçeksepeti kampanya koşullarında değişiklik yapma hakkını saklı tutar.
Ürünün iade politikasını öğrenmek için tıklayın.
Bu ürün ALKATRONİK tarafından gönderilecektir.
Bu satıcının ürünlerinde geçerli 350,00 TL Üzeri Kargo Bedava
Bu Satıcının Tüm Ürünlerini Görüntüle
Ürün sayfasında gördüğünüz fiyat bilgileri, satıcı tarafından belirlenmektedir.
Adafruit ATSAMD09 Breakout Board with Seesaw
ATSAMD09D14 SAM D ARM® Cortex®-M0+ MCU 32-Bit Embedded Evaluation Board
DESCRIPTION
Adafruit ATSAMD09 Breakout Board with Seesaw is a near-universal converter framework and is great for the development of seesaw capabilities. This breakout board allows the user to add or add and extend hardware support to any I2C-capable microcontroller or microcomputer. The ATSAMD09 breakout board can be configured to give a wide range of capabilities including I2C GPIO expanders, ADCs, and PWM drivers without extra expenditures. This breakout board features 3 x 12-bit ADC inputs, 3 x 8-bit PWM outputs, and 7 x GPIO with selectable pull-up or pulldown. The ATSAMD09 breakout board also offers 1 x NeoPixel output, 1 x EEPROM with 64bytes of NVM memory, and 2 x I2C address selection pins.
Adafruit seesaw is a near-universal converter framework which allows you to add and extend hardware support to any I2C-capable microcontroller or microcomputer. Instead of getting separate I2C GPIO expanders, ADCs, PWM drivers, etc, seesaw can be configured to give a wide range of capabilities.
SPECIFICATIONS
- Powered by Microchip's ATSAMD09 ARM®-Cortex®-M0+ MCU
- Near-universal converter framework
- Add and extend hardware support to any I2C-capable microcontroller or microcomputer
- I2C GPIO expanders, ADCs, and PWM drivers etc
- Great for the development of seesaw capabilities
- Can be used as-is to give the Raspberry Pi or ESP8266 more hardware support
- Compact and economical
- 3 x 12-bit ADC inputs
- 3 x 8-bit PWM outputs
- 7 x GPIO with selectable pullup or pulldown
- 1 x NeoPixel output (up to 63 pixels)
- 1 x EEPROM with 64 byte of NVM memory (handy for storing small access tokens or MAC addresses)
- 1 x Interrupt output that can be triggered by any of the accessories
- 2 x I2C address selection pins
- 1 x Activity LED
But you can reprogram and reconfigure the chip to have more or less of each peripheral - as long as it fits into the ATSAMD09D14's firmware! For example, there's also a UART converter but it isn't included in the default firmware.
The ATSAMD09 breakout is great for development of seesaw capabilities (we use it in-house for our design work) or you can use it as-is to give your Raspberry Pi or ESP8266 more hardware support! Each breakout comes with the assembled and tested board, as well as some header strips.
Please note: The boards do not come with a bootloader. If you want to do development on seesaw ( changing the configuration) you'll need to pick up a J-Link and we recommend a SWD adapter breakout. At this time our project is for Atmel Studio but you could probably get it working with arm gcc and a Makefile. We don't provide any support for custom builds of seesaw - we think this is cool and useful for the Maker community!
For more details including the documentation on how to use seesaw, libraries for Arduino/CircuitPython/Raspberry Pi Python, schematics, and more check out the Adafruit seesaw guide
TECHNICAL DETAILS
- Uses I2C address 0x49 - can be changed to 0x4A, 0x4B or 0x4C
- Please note - there's a bug in the current shipping seesaw firmware that can only support up to 63 NeoPixels
- Product Dimensions: x x / " x " x "
- Product Weight: /
Paket içeriği :
- 1 Adet Adafruit ATSAMD09 Breakout Geliştirme Kartı.
- 2 Adet 16 pin Erkek Pin Header
Garanti: Yarı mamul olması sebebiyle ürünün garantisi bulunmamaktadır.
