Bu ürünün kampanyalı satışı stoklarla sınırlıdır. Bir tüketici bu kampanya stoğundan maksimum 10 adet satın alabilir.
Çiçeksepeti kampanya koşullarında değişiklik yapma hakkını saklı tutar.
Ürünün iade politikasını öğrenmek için tıklayın.
Bu ürün ALKATRONİK tarafından gönderilecektir.
Bu satıcının ürünlerinde geçerli 350,00 TL Üzeri Kargo Bedava
Bu Satıcının Tüm Ürünlerini Görüntüle
Ürün sayfasında gördüğünüz fiyat bilgileri, satıcı tarafından belirlenmektedir.
BMP280 Dijital Hava Basıncı Sensörü
Bosch BMP280 sensörü kullanılarak yapılmış basınç sensörüdür. Havadaki basıncı ölçerek dijital şekilde çıkış veren sensör modülüdür. Hava basıncına göre sensör yüksekliğinin anlaşılmasından dolayı, çeşitli multicopter projeleri başta olmak üzere pek çok uygulamada kullanılabilir. I2C ve/veya SPI haberleşmesi formatında iletişim kurulabilmektadır.
BMP280, 300 - 1100 hPa arasındaki basınç değerini ölçebilmekte ve 500 metre ile 9000 metre arasındaki yükseklik ile ilgili bilgi vermektedir. 0.01 hPa (<10 cm) gibi çok yüksek bir çözünürlüğe sahiptir.
BMP280 is an absolute barometric pressure sensor especially designed for mobile applications. The sensor module is housed in an extremely compact package. Its small dimensions and its low power consumption allow for the implementation in battery powered devices such as mobile phones, GPS modules or watches.
As its predecessor BMP180, BMP280 is based on Bosch’s proven Piezo-resistive pressure sensor technology featuring high accuracy and linearity as well as long term stability and high EMC robustness. Numerous device operation options offer highest flexibility to optimize the device regarding power consumption, resolution and filter performance. A tested set of default settings for example use case is provided to the developer in order to make design-in as easy as possible.
This BMP280 Barometer is a breakout board for Bosch BMP280 high-precision and low-power digital barometer. This module can be used to measure temperature andatmospheric pressure accurately. As the atmospheric pressure changes with altitude, it can also measure approximate altitude of a place. It can be connected to a microcontroller with I2C or through SPI bus.
The BMP280 is an upgraded version of BMP180. BMP280 gets dramatic improvements from BMP180. BMP280 comes with a smaller footprint, lower power consumption, lower noise measurements, higher resolutions for pressure and temperature, lower RMS noise, newly added interface SPI, more measuring modes, higher measuring rate and newly added filter against environmental interference.
Description:
- BMP280 is a high-precision, small size, ultra-low power pressure sensor.
- BME280,the precision sensor from Bosch, is soldered onto PCB
- Operating Pressure 4.35PSI ~ 15.95PSI (300 ~ 1100 hPa)
- Very low noise - up to 0.02hPa (17cm)
- Full calibrated
- Output Type I²C and SPI
- Output 16 ~ 19 b
- Accuracy ~ ±1 hPa
- Voltage - Supply 1.62V ~ 3.6V
- Material: Plastic + Electronic Component
- Pressure Range: 300~1100hPa ( 9000m to -500m above sea level )
- Ultra Low Power Consumption: 2.74 µA
- MSL 1 Reaction Time: 7.5ms
- Standby Current: 0.1µA
- Resolution: 0.06hPa(0.5m)(in low power mode);
- 0.03hPa(0.25m)(in high linear mode)
- Overall Size: 13x10mm/0.47x0.39inch
ParameterTechnical data Operation range (full accuracy)Pressure: 300...1100 hPa
Temperature: -40…85°C Absolute accuracy
(Temp. @ 0…+65°C)~ ±1 hPa Relative accuracy
p = 700…900hPa
(Temp. @ +25...+40°C)± 0.12 hPa (typical) equivalent to ±1 m Average current consumption (1 Hz data refresh rate)2.74 µA, typical (ultra-low power mode) Average current consumption in sleep mode0.1 µA Average measurement time5.5 msec (ultra-low power preset) Supply voltage VDDIO1.2 ... 3.6 V Supply voltage VDD1.71 ... 3.6 V Resolution of dataPressure: 0.01 hPa ( < 10 cm) Temperature: 0.01° C Temperature coefficient offset
(+25°…+40°C @900hPa)1.5 Pa/K, equiv. to 12.6 cm/K InterfaceI²C and SPI Package dimensions8-Pin LGA with metal 2.0 x 2.5 x 0.95 mm³
Paket İçeriği:
- 1 Adet BMP280 Sensör
