J-Link V9 Jtag Programlayıcı Jlınk Programmer Debugger

Ürün klon Jlink v9 programlayıcıdır. Ürün ile alakalı hiç bir teknik destek verilmez.

Ürün paketi açılarak test edilir. Çalıştığı görülerek kargolanır.

Description

• J-Link is a USB powered JTAG emulator supporting a large number of CPU cores.
• Based on a 32-bit RISC CPU, it can communicate at high speed with the supported target CPUs. J-Link is used around the world in tens of thousand places for development and production (flash programming) purposes.
• J-Link is supported by all major IDEs such as IAR EWARM, Keil MDK, Rowley CrossWorks, Atollic TrueSTUDIO, IAR EWRX, Renesas HEW, Renesas e2studio, and many others.
• Including all models, more than 100,000 J-Links have been sold so far, making J-Link probably the most popular emulator for ARM cores and the de-facto standard.

Features

• Direct download into flash memoryof most popular microcontrollers supported
• Supported CPUs: Any ARM7/9/11, Cortex-A5/A8/A9, Cortex-M0/M1/M3/M4, Cortex-R4, RX100/RX200/RX610/RX621/RX62N/RX62T/RX630/RX631/RX63N
• Download speed up to 1 MByte/second
• Supportsunlimited breakpointsin flash memory!1More info...
• Setting breakpoints inexternalflash memory of Cortex-M systems is possible with
• J-Link'sUnlimited Flash Breakpointstechnology only!
• Supported by all major IDEsMore info...
• Supports concurrent access to CPU by multiple applications3
• Crossplatform support (runs on Windows, Linux, Mac OS X)4
• Intelligence in the emulator firmwareMore info...
• Remote Server included. Allows using J-Link remotely via TCP/IPMore info...
• GDBServer includedMore info...
• Production flash programming software (J-Flash) availableMore info...
• Software Developer Kit (SDK) availableMore info...
• Supports multiple target interfaces: JTAG, SWD
• Supports SWV/SWO (Serial Wire Viewer / Serial wire output)
• Wide target voltage range: - , 5V tolerant
• Supports JTAG chains with multiple devices
• Embedded Trace Buffer (ETB) support
• Various target adapters available, including optical isolation info...
• RDI interface DLL info...
• Fully plug and play compatible
• No power supply required, powered through USB
• Support for adaptive clocking
• All JTAG signals can be monitored, target voltage can be measured
• Target power supply: J-Link can supply up to 300 mA to target with overload protection

Package:

• 1x J-link V9 ARM Emulator
• 1x USB Cable
• 1x Connector Cable