Bu ürünün kampanyalı satışı stoklarla sınırlıdır. Bir tüketici bu kampanya stoğundan maksimum 10 adet satın alabilir.
Çiçeksepeti kampanya koşullarında değişiklik yapma hakkını saklı tutar.
Ürünün iade politikasını öğrenmek için tıklayın.
Bu ürün ALKATRONİK tarafından gönderilecektir.
Bu satıcının ürünlerinde geçerli 350,00 TL Üzeri Kargo Bedava
Bu Satıcının Tüm Ürünlerini Görüntüle
Ürün sayfasında gördüğünüz fiyat bilgileri, satıcı tarafından belirlenmektedir.
2S 3A Lityum Batarya BMS Koruma Kartı
2 Adet 18650 pil için uygundur. Pil şarj etmez. Pil koruması içindir. Balans görevini üstlenir.
Özellikler:
- 2 Adet seri lityum pil için koruma devresi.
- Aşırı şarj koruması.
- Aşırı deşarj koruması.
- Kısa devre koruması.
- Aşırı akım akma koruması.
- Aşırı şarj voltajı: – ±
- Aşırı deşarj gerilimi: – ±
- Maksimum sürekli şarj akımı: 3A
- Boyut: 36mm x 6mm x 2mm
Kart Bağlantıları: Lütfen 1 numaralı resimi inceleyiniz.
- B+ Pil + bağlantısı
- B- Pil – bağlantısı
- BM Pil 1 ve Pil 2 arasındaki bağlantı
- P+ Şarj ve yük bağlantısı için ortak nokta. Pozitif uç bağlanır.
- P- Şarj ve yük bağlantısı için ortak nokta. Negatif uç bağlanır.
Features:
- High-accuracy voltage detection circuit;
- Terminal of the charger using high voltage device;
- Built-in three-stage over-current detection circuit (over-current 1, over-current 2, load short circuit);
- MOS transistor can control the battery charge and discharge;
- Low standby current consumption.
Parameter:
- Short circuit protection. Protectable,charge can repair
- Overcharge protection
- Over-discharge protection
- Overcurrent protection
- Overcharge Detection Voltage: ±
- Over Discharge Detection Voltage: ±
- Maximum Working Continuous Current: 3A
- Max peak current: 5A
- Small current:less than 3uA
- Life cycle :more than 50000hours
- Internal Resistance: Less than 45m ?
- Operating Temperature: -40-50 degree
Solder joint description:
- B+ is connected to the battery positive pole;
- B- is connected to the negative pole of the battery;
- BM is connected to the connection point between battery 1 and battery 2.
- P+ is connected to the positive terminal of the charge/discharge terminal (the charge terminal/discharge terminal is shared)
- P- Connect the charge/discharge terminal negative (common to the charge/discharge terminal).
Paket İçeriği:
- 1 Adet 2S 3A Lityum Batarya BMS Koruma Kartı
