ULINK 2 Arm Jtag Programlayıcı ve Hata Ayıklayıcı Debugger

ULINK 2 (Klon) Arm Jtag Programlayıcı ve Hata Ayıklayıcı (Debugger)

Ulink 2 jtag destekli mcular için programlayıcı ve debugger (hata ayıklayıcı) aracı olarak kullanılır. JTAG, SWD ve OCDS desteği vardır. Çin üretimi klondur, kapalı poşette gelmektedir.

Features:

• Unlimited Breakpoints RAM
• Max 2 ROM Breakpoints (ARM7/9)
• Max 6 ROM Breakpoints (Cortex-M3)
• Execution breakpoints (Set While Executing)
• Max 2 (R / W Only, With Value)Access Breakpoints (ARM7 / 9)
• Max 4 (With Value) Access Breakpoints (Cortex-M3)
• No Trace History
• JTAG RTCK support (Return Clock)
• 28K Memory R / W (Bytes / sec)
• 25K Flash R / W (Bytes / sec)
• 50 Single-Step (Fast) (Instructions / sec)
• JTAG speed up to 10MHz
• Supports various ARM7, ARM9, Cortex-M, 8051, and C166 devices
• Serial Wire Debug (SWD)
• Serial Wire Viewer (SWV) Data Trace for Cortex-M up to 1Mbit/s (UART mode)
• Real-Time Agent with memory R/W during execution, terminal emulation, and serial debug output
• Support the program to run during the read-write memory, terminal emulation and serial debug output.
• Seamless integration with the Keil µVision IDE & Debugger
• Conveniently carried out target hardware on-chip debugging (using on-chip JTAG, SWD, and OCDS), Flash Programming ..
• Standard Windows USB driver support Plug and Play ULINK2,
• Support for ARM Cortex-M3-based serial wire debug,
• Support the program to run during the read-write memory, terminal emulation and serial debug output,
• Wide target voltage range: -
• USB powered (No power supply required)
• Plug-and-Play installation using standard Windows USB HID drivers
• Target Connectors 20-pin ( ") - ARM Standard JTAG Connector

Supported Device Families

• ARM7
• ARM9
• Cortex-M0
• Cortex-M1
• Cortex-M3
• XC800 (8051)
• µPSD (8051)
• XC166/XE166/XC2000
• LPC950 (8051)

Paket İçeriği:

• 1 Adet Ulink2 USB JTAG Adapter
• 1 Adet 20 Pin JTAG Flat cable
• 1 Adet USB Cable